BASIC COMBINATIONS OF TYPE 2 LATCHES AND RECEIVERS  

  APPLICATIONS TYPE 2 LARGE LATCHES  

  Either the S1500 or the S1250 Spring Hook can be used in the Large Type 2 Latches  

The Type 2 Latch can have the Spring Hook mounted in reverse in the case (S1500-2R-750)  

    The variable 'Setbacks'* And Choices of Spring Hooks The S1500 or S1250 Spring Hook Can Be Used In the Type 2 Latches  

    The Variable 'Setbacks'* And Short & Slotted Case Configurations  

  Applications  

Matching Type 2 Large Latches with Receivers | The Variable ‘Setbacks’* And Choice Of Spring Hooks  

SHOWN HERE IS A SINGLE HANDLE MOUNTING (OPERABLE FROM BOTH SIDES) WITH A LARGE TYPE 2 LATCH MORTISED INTO THE DOOR • These illustrations show components and mounting directions • For Dual Handles See TDS 83-10B  

FOR DOOR APPLICATIONS WITH HANDLES ON BOTH SIDES. • These illustrations show components and mounting directions • For Single Handle Assemblies See TDS 83-10A  

A TYPE 2R LATCH AND TYPE 2 RECEIVER ARE MOUNTED IN THICK FRAMING WITH FLANGES REVERSED  

ATTACHING THIN PANELS AT ‘T’ AND CORNER JOINTS. LATCH IS MOUNTED BEHIND FRAMING; ‘U’ RECEIVER IS SURFACE MOUNTED. WITH THIS LATCH/RECEIVER COMBINATION, EITHER PANEL CAN BE INVERTED.  

USED ON EXHIBITS, STORE FIXTURES, OFFICE PANELS, PREFAB STRUCTURES, ETC. THIS TYPE 2 LATCH AND ‘H’ RECEIVER ARE MOUNTED BEHIND THE PANEL FRAMING LESS PANEL PREPARATION • NO LATCH FLANGE RECESS REQUIRED • CAN BE NAILED IN PLACE  

USED ON EXHIBITS, STORE FIXTURES, OFFICE PANELS, PREFAB STRUCTURES, ETC. THIS TYPE 2 LATCH IS MOUNTED INSIDE THE METAL FRAMING. SLOT IN THE ADJOINING MEMBER IS USED AS A RECEIVER.  

THE THIN LATCH FOR JOINING THIN PANELS ON SECTIONAL FURNITURE, EXHIBITS, STORE FIXTURES, COUNTERS AND BARS, FLOORING, ETC.  

USED IN THIN WALL PARTITIONS FOR IN-LINE BUTT JOINTS AND ‘BLIND’ MORTISES AT ‘T’ & CORNER JOINTS For Prefab construction of Exhibits, Store Fixtures, Office Panels, Etc. This Latch/Receiver Combination is a Unique and Frequently Used Method  

THE TYPE 2 LATCH IS UNEXCELLED AS A CASE LATCH FOR EQUIPMENT ATTACHMENT, EQUIPMENT CASES, MODULAR UNIT COUPLING, COFFIN SEALING, PICKUP TRUCK CAMPER TIEDOWN, TRACTOR HOODS, WALL PANELING, ETC. The Type 2 Latch is shown below in a typical application joining thin metal elements where a slot in the metal is used as a receiver.  

THIS SHALLOW RECEIVER CAN BE MOUNTED FLUSH AND BLIND IN VERY THIN PANELS RECEIVER DEPTH IS ONLY 1/2" (12.7mm)  

FOR JOINING THIN PANELS TO THINNER WALL PANELS OR TUBING  

THIS SHALLOW RSL RECEIVER IS MOUNTED BELOW FLUSH IN A BLIND MORTISE IN A VERY THIN PANEL SO THAT A S1250--2-1.000 LATCH CAN BE USED By simply recessing the Type 2 RSL Receiver Mounting .062”/1.6mm the fabricator can maintain the use of a S1250-2-1.000 Latch in his panel as shown here.  

CHANGING THE ANGLE BETWEEN PANELS JOINED TO A TUBE IS FACILITATED BY WIDENING THE RECEIVER SLOTS IN THE TUBE AS SHOWN HERE In the Typical Example Shown Here, Panels of 1.750”/44.5mm Thickness Are Being Joined at an Initial Angle of 60°, With Some Angular Variation Required. A Tube Diameter of 3.500”/88.9mm and a Slot Width of 1.040”/26.4mm Accommodates the Panels and Allows Angular Displacement of Each Panel of ±10°. Other Tube Diameters and Slot Widths Can Be Used.  

JOINING PANELS - FREE STANDING, OR TO A WALL, AT VARIABLE ANGLES USING NORSE LATCHES AND ‘O’ & ‘OD’ RECEIVERS For: Exhibits • Office Landscaping • Store fixtures • Enclosures Museum • Theatrical & Window Displays • Safety Shields • Etc.  

JOINING MULTIPLE FREE STANDING PANELS AT VARIABLE ANGLES For: Exhibits • Office Landscaping • Store Fixtures • Stage Settings Museum & Art Displays • Safety Sheilds • Window Displays • Etc.  

JOINING PANELS – FREE STANDING, OR TO A WALL, AT VARIABLE ANGLES USING NORSE LATCHES AND ‘O’ & ‘OD’ RECEIVERS For: Exhibits • Office Landscaping • Store fixtures • Enclosures Museum • Theatrical & Window Displays • Safety Shields • Etc. For ‘O’ Rceivers See TDS 95-1A1  

THE LARGE ‘O’ AND ‘OD’ RECEIVERS CAN BE USED FOR EXHIBITS, STORE FIXTURES, MUSEUM AND ART DISPLAYS, OR FOR NUMEROUS PARTITIONING FUNCTIONS. ‘O’ and ‘OD’ Receivers can be used with Type 2 and Type 3 Latches as shown here and on the following pages. They can also be used with Type 1 Latches: see TDS 48.  

SHOWN HERE ARE THREE SIZES OF ‘O’ RECEIVERS WHICH WILL ACCOMMODATE NUMEROUS PANELS AT ANY ANGLE. TYPE 1 AND TYPE 3 LATCHES CAN ALSO BE USED WITH ‘O’ RECEIVERS. See TDS 48 for Type1 Latch and ‘O’ Receiver mounting.  

Shown below are two of many possible panel arrangements using Type 2 Latches with the OR250-3.5 and the OR250-2.38 ‘O’ Receivers. Type 1 and Type 3 Latches can also be used.  

Shown below is another of many possible panel arrangements using Type 2 Latches with the OR250-3.5 ‘O’ Receiver. Type 1 and Type 3 Latches can also be used. See TDS 48 for Type 1 Latches and ‘O’ Receivers.  

The full scale illustrations on these sheets show the capacity of the several sizes of ‘O’ Receivers to accommodate panels of different thicknesses and arrangements. Type 1 and Type 3 Latches can also be used. See TDS 48 for Type 1 Latches and ‘O’ Receivers Shown below is one of many possible panel arrangements using Type 2 Latches and the OR250-4.5 Receiver.  

FOR EXHIBITS, STORE FIXTURES, OFFICE PANELING, MODULAR EQUIPMENT, ETC. Type 2 Latches can be used on tubular framed paneling to make in-line butt joints, ‘T’ & corner joints, and also 4-way posts utilizing a slot in the attached tubular framing as a Receiver.  

THIS APPLICATION SHOWS THE MOUNTING METHOD AND SLOTTING NECESSARY FOR THE INSTALLATION OF THE LATCH THROUGH THE TUBING SLOT  

THIS APPLICATION SHOWS THE MOUNTING METHOD AND SLOTTING NECESSARY FOR THE INSTALLATION OF THE LATCHES & RECEIVERS THROUGH THE TUBING SLOTS  

THE ROD RECEIVER CAN BE USED AT ALMOST ANY ‘SETBACK’ WITH ANY LATCH, PLUS PROVIDING OTHER ADVANTAGES